Product Details:
Payment & Shipping Terms:
|
| Slice Thickness: | 0.3-2mm | Capacity: | 50-300kg/h |
|---|---|---|---|
| Application: | Peanut, Almond | Material: | Stainless Steel |
| Voltage: | 220/380V | Warranty: | 1 Year |
| High Light: | nut slicer machine,betel nut cutting machine |
||
Commercial Stainless Steel Almond Slicing Machine , Peanut Nut Slicer Cutter
Electric Peanut Slicing Machine Working Principle
This machine is equipped with pneumatic feeding device and slicing device. Firstly, the nuts are put into the feeding trough, and the pneumatic device presses the nuts into the cutter head and then cuts out the kernel flakes. The thickness of the slices can be arbitrarily adjusted according to the customer's specific requirements.
Almond Slicing Machine Advantages
1. Widely used, it can be used to process peanut kernels, almond slices, hazelnuts and other nuts.
2. High degree of automation, high efficiency, saving time and effort.
3. The body is made of stainless steel, rust-proof and hygienic. The nut slices made meet the hygiene standards.
4. The cutter is made of high-quality high-speed steel, which greatly prolongs the service life.
5. The sharp knife edge ensures that the surface of the peanut pieces is even and the edges are smooth.
6. Slice thickness can be adjusted between 0.3 ~ 2 mm.
Commercial Peanut Slicer Machine Application
The slicer is mainly used in the food industry. The nut slices produced by the slicer are mainly used as raw materials or ingredients of bread, cakes, biscuits, candy, crisp peanuts, ice cream and desserts.
Electric Almond Slicer Machine Parameter
| Model | GGQP--2 |
| Voltage | 220/380V |
| Power | 1.5kw |
| Air pressure | 0.3MPA |
| Blade speed | 100-700rpm/min |
| Slicing thickness | 0.3-2mm |
| Slice output | 50-300kg/h |
| Weight | 170kg |
| Dimension | 900*550*1900mm |
Notes of Commercial Nut Slicer Machine:
1. the nut can not be too dry, if the material is too dry, soak first, then dry, and then slice again.
If the material is too dry, the slice is easily broken and incomplete. If the moisture content is too high, the slice may accumulate at the cutter and the discharge port.
2. nuts should be carefully selected process, can not be mixed with sand and other debris, otherwise it will lead to blade edge missing.
3. cylinder working pressure can not be too high, should be controlled at 0.3-0.4MPa, if the pressure is too low, the slice is easy to break, rather than the whole piece. When working, high pressure can cause tool chatter and make slice thickness uneven.
After - sales service of Stainless Steel Nut Cutter Machine
On-Demand design:
To communicate with customers and provide professional technical advice, according to customer needs to provide on-site exploration, according to the production environment to provide reasonable process planning. For customers to design the most appropriate process, the real realization of time-saving, labor-saving, cost savings.
Installation training:
Technicians are responsible for installation, commissioning and training of technicians.
After-Sales protection:
One-year warranty, life-long maintenance. 24-hour technical support to provide technical diagnosis to customers. After receiving the fault notice, the maintenance technician should troubleshoot the problem according to the actual situation.
